Positive Feed Drilling Machine - Manual

158-15QRHD Series

Nominal Capacity 15QRHD 5/8” | 16mm in Al

Power 1.6hp | 1/2kW

Thrust 158Q 1000Ib | 4400N

Base Weight 9.9lb | 4.5kg

Noise Level: <=80 dBA

Air Inlet Pressure: 90 psi | 6.3 bar

Air Consumption: 63 cfm | 1780 l/min

Stroke Per Application

  
        Separate manual control for air motor and feed - less affect from air supply variation
    
        Feed is engaged by pressing down on feed engagement lever/button
    
        Automatic retract stop with protective rolling impulse clutch prevents jamming of spindle at end of retract.
    
        Air motor is manually started at beginning and shut off at completion of drill cycle.
    
        158-15QRHD Externally replaceable shear pin provides gear protection if chips pack or cutter binds.
    
        Many customizable options available - please contact us for configuration assistance

    
                MODEL
                MOTOR CONFIGURATION
                SPEED
                FEED RATE
                SPINDLE ATTACHMENT
            
                R/MIN
                MM/REV
                IN/REV
            
                158-15QRHD
                RIGHT ANGLE
                
                    110 | 140

                    230 | 290

                    490 | 600

                    1000 | 1200

                    2000 | 3000
                
                    .013

                    .025

                    .051

                    .076

                    .152
                
                    .0005

                    .001

                    .002

                    .003

                    .006
                
                    SPECIALS ON REQUEST

                    1/4"-28

                    5/16"-24

                    3/8"-24

                    9/16"-18

                    200DA COLLET
                
                158-15QRH-DV-VARIABLE SPEED
                RIGHT ANGLE
                
                    70-150

                    140-290

                    250-600

                    490-1200

                    2000-3000
                
                    .013

                    .025

                    .051

                    .076

                    .152
                
                    .0005

                    .001

                    .002

                    .003

                    .006
                
                    SPECIALS ON REQUEST

                    1/4"-28

                    5/16"-24

                    3/8"-24

                    9/16"-18

                    200DA COLLET

Fixturing Options

  
        NOSE FOR TWIST LOCK BUSHING WITH AND WITHOUT VACUUM
    
        EXTERNAL MITIS NOSE WITH AND WITHOUT VACUUM
    
        CONCENTRIC COLLET WITH AND WITHOUT VACUUM (NOT AVAILABLE ON THE 158QR OR 158QRV)

Accessories

  
        NOSE INDEXER
    
        ON BOARD COOLANT
    
        CYCLE COUNTER (SERVICE, MAINTENANCE AND CUTTER LIFE)
    
        MITIS CHIP FRAGMENTATION MODULE
    
        HANDLES
    
        CUTTERS