Positive Feed Drilling Machine - Automatic

A1 Series

Nominal Capacity 1in | 25.4mm in Al

Turbine 2.4hp | 1.8kW & Vane 1.7hp | 1.3kW

Thrust 500Ib | 2200N

Base Weight 7Ib | 3.2kg

Noise Level: <=85 dBA

Air Inlet Pressure: 90 psi | 6.3 bar

Stroke Per Application

Fully automatic drill cycle start, feed, retract, stop
Drill and 100% countersink with chip fragmentation using proven Mitis™ technology
Easy change for both feed rate and Mitis ™ in less than 15 minutes
External shear pin for gear head protection and easy change
Up to 500 hours / 100000 cycle PM interval
Grease ports, self contained bearings and captive O rings reduce service cost
Thrust overload for countersinking or in event of tool overthrust when drilling e.g. from broken cutter
Available in both governed turbine or vane motor to minimize speed drop when drilling
 Wide range of fixturing options and accessories
Many customizable options available - please contact us for configuration assistance

    
                MODEL
                MOTOR CONFIGURATION
                SPEED
                FEED RATE
                SPINDLE ATTACHMENT
            
                R/MIN
                MM/REV
                IN/REV
            
                A14T
                RIGHT ANGLE TURBINE
                
                    430 | 630

                    800 | 1000

                    1800 | 2600

                    3250
                
                    .025

                    .05

                    .08

                    .10

                    .15

                    .18

                    .20
                
                    .001

                    .002

                    .003

                    .004

                    .006

                    .007

                    .008

                    SPECIALS ON REQUEST

                    1/4"-28

                    5/16"-24

                    3/8"-24

                    9/16"-24

                    200DA COLLET
                
                A14V
                RIGHT ANGLE VANE MOTOR
                
                    190 | 250

                    320 | 350

                    410 | 460

                    510 | 600

                    670 | 760

                    850 | 950

                    1450 | 1700

                    1900 | 2100

                    2500 | 2800

                    3100
                
                    .025

                    .05

                    .08

                    .10

                    .15

                    .18

                    .20
                
                    .001

                    .002

                    .003

                    .004

                    .006

                    .007

                    .008

                    SPECIALS ON REQUEST

                    1/4"-28

                    5/16"-24

                    3/8"-24

                    9/16"-24

                    200DA COLLET
                
                A16T
                INLINE TURBINE
                
                    430 | 630

                    800 | 1000

                    1800 | 2600

                    3250
                
                    .025

                    .05

                    .08

                    .10

                    .15

                    .18

                    .20
                
                    .001

                    .002

                    .003

                    .004

                    .006

                    .007

                    .008

                    SPECIALS ON REQUEST

                    1/4"-28

                    5/16"-24

                    3/8"-24

                    9/16"-24

                    200DA COLLET
                
                A16V
                INLINE VANE MOTOR
                
                    190 | 250

                    320 | 350

                    410 | 460

                    510 | 600

                    670 | 760

                    850 | 950

                    1450 | 1700

                    1900 | 2100

                    2500 | 2800

                    3100
                
                    .025

                    .05

                    .08

                    .10

                    .15

                    .18

                    .20
                
                    .001

                    .002

                    .003

                    .004

                    .006

                    .007

                    .008

                    SPECIALS ON REQUEST

                    1/4"-28

                    5/16"-24

                    3/8"-24

                    9/16"-24

                    200DA COLLET

Fixturing Options

NOSE FOR TWIST LOCK BUSHING - STANDARD AND VACUUM
DEPTH SENSING TWIST LOCK
CONCENTRIC COLLET
TEMPLATE FOOT

Accessories

NOSE INDEXER
ON BOARD COOLANT
FLOOR PUMP COOLANT
ELECTRONIC CYCLE COUNTER (SERVICE, MAINTENANCE AND CUTTER LIFE)
CUTTERS
HANDLES FOR OPERATION AND HANDLING