Positive Feed Drilling Machine - Automatic

A2 Series

Nominal Capacity 1/2in | 12.7mm in Al

Turbine 2.2hp | 1.6kW & Vane 1.4hp | 1kW

Thrust 400Ib | 1800N

Base Weight 5lb | 2.3kg

Noise Level: <=85 dBA

Air Inlet Pressure: 90 psi | 6.3 bar

Stroke Per Application

        Fully automatic drill cycle start, feed, retract, stop
    
        Drill and 100% countersink with chip fragmentation using proven Mitis™ technology
    
        Easy change for both feed rate and Mitis™ in less than 15 minutes
    
        External shear pin for gear head protection and easy change
    
        Up to 500 hours / 100000 cycle PM interval
    
        Grease ports, self contained bearings and captive O rings reduce service cost
    
        Thrust overload for countersinking or in event of tool overthrust when drilling e.g. from broker cutter
    
        Available in both governed turbine or vane motor to minimize speed drop when drilling
    
        Wide range of fixturing options and accessories
    
        Many configurable options available - please contact us for configuration assistance

    
                MODEL
                MOTOR CONFIGURATION
                SPEED
                FEED RATE
                SPINDLE ATTACHMENT
            
                R/MIN
                MM/REV
                IN/REV
            
                A24T
                RIGHT ANGLE TURBINE
                
                    450 | 550

                    650 | 700

                    850 | 1000

                    1200 | 1800

                    2700 | 3400

                    4000 | 4400

                    5400
                
                    .025

                    .05

                    .08

                    .10

                    .15

                    .18

                    .20
                
                    .001

                    .002

                    .003

                    .004

                    .006

                    .007

                    .008

                    SPECIALS ON REQUEST

                    1/4"-28

                    5/16"-24

                    3/8"-24

                    9/16"-24

                    200DA COLLET
                
                A24V
                RIGHT ANGLE VANE MOTOR
                
                    250 | 3200

                    380 | 4000

                    480 | 5500

                    600 | 6500

                    700 | 8000

                    1000 | 11500

                    1500 | 17000

                    2300 | 26000

                    2900 | 33000

                    3700 | 39000

                    4200 | 45000

                    5200
                
                    .025

                    .05

                    .08

                    .10

                    .15

                    .18

                    .20
                
                    .001

                    .002

                    .003

                    .004

                    .006

                    .007

                    .008

                    SPECIALS ON REQUEST

                    1/4"-28

                    5/16"-24

                    3/8"-24

                    9/16"-24

                    200DA COLLET
                
                A26T
                INLINE TURBINE
                
                    450 | 550

                    650 | 700

                    850 | 1000

                    1200 | 1800

                    2700 | 3400

                    4000 | 4400

                    5400
                
                    .025

                    .05

                    .08

                    .10

                    .15

                    .18

                    .20
                
                    .001

                    .002

                    .003

                    .004

                    .006

                    .007

                    .008

                    SPECIALS ON REQUEST

                    1/4"-28

                    5/16"-24

                    3/8"-24

                    9/16"-24

                    200DA COLLET
                
                A26V
                INLINE VANE MOTOR
                
                    250 | 320

                    380 | 400

                    430 | 480

                    550 | 600

                    650 | 700

                    800 | 1000

                    1150 | 1500

                    1700 | 2300

                    2600 | 2900

                    3300 | 3700

                    3900 | 4200

                    4500 | 5200
                
                    .025

                    .05

                    .08

                    .10

                    .15

                    .18

                    .20
                
                    .001

                    .002

                    .003

                    .004

                    .006

                    .007

                    .008

                    SPECIALS ON REQUEST

                    1/4"-28

                    5/16"-24

                    3/8"-24

                    9/16"-24

                    200DA COLLET

Fixturing Options

NOSE FOR TWIST LOCK BUSHING - STANDARD AND VACUUM
DEPTH SENSING TWIST LOCK
CONCENTRIC COLLET
TEMPLATE FOOT

Accessories

NOSE INDEXER
ON BOARD COOLANT
FLOOR PUMP COOLANT
ELECTRONIC CYCLE COUNTER (SERVICE, MAINTENANCE AND CUTTER LIFE)
CUTTERS
HANDLES FOR OPERATION AND HANDLING