Hand Drilling, Countersinking & Spotfacing

RB 406 Microstop Cage

Stroke 14mm | 0.55in

Cutter Thread M10 X 1

Diagram of a basic drill cage with adapter and four different mounting base flat bearings for illustration purposes.

This drill cage has been designed for use with cutter of 7/8" to 1.1/2" dia.
Different mounting bases available.

        Detachable spindle adaptor Jacobs No 1 taper provides alternative methods for use:
        In combination with 3 jaw chuck using 10mm | 0.39" shank.

                Mounting direct onto machine spindle using Jacobs No 1 taper. This method provides increased level of concentricity, while reducing the 
                length and weight of the drill / tool assembly. This results in better performance, improved machining and less fatigue on the operator.
            

    
Cemented, hardened and ground chrome-nickel steel spindle mounted on 3 needle-bearings and a thrust bearing.
Microstop depth adjustment (1 scale division = .001").
Microstop depth setting is held securely in place by locknut with seal. This patented feature allows an easy loosening of the locknut without damage to the drill cage.

    
        
                MODEL
                SHANK
                CUTTER THREAD
                STROKE
                VACUUM
                MOUNTING
BASE STYLE
                WINDOW
SIZE
                DIAMETER
MAX
                OVERALL
LENGTH
MAX
                OVERALL
LENGTH
MIN
                WEIGHT
            

                IN
                MM
                MM
                MM
                MM
                MM
                G
            

        10030105W	0.39	10	M10 X 1	14	NO	NONE/FLAT BASE	LARGE	36	163	136	545
10030010W	0.39	10	M10 X 1	14	NO	NONE/FLAT BASE	LARGE	36	163	136	545
10030010	0.39	10	M10 X 1	14	NO	NONE/FLAT BASE	SMALL	36	163	136	545
10030105	0.39	10	M10 X 1	14	NO	NONE/FLAT BASE	SMALL	36	163	136	545

    