Compression Riveter Alligator Jaw Type
RB 44-60
RIVET SET HOLE SIZE
REFERENCE
STD DIAMETER 5 MM
60110010
STD DIAMETER 3/16"
60110011PT
Description and Advantages
- Compression riveters RB 44-60 type use the same basic tool: pneumatic two pistons cylinder with pneumatic retract.
- Rivet set holder adjustment - stroke 0.2" (5 mm) allows the operator to use this compression riveter with different thicknesses without changing the rivet set.
-
This light, sturdy, compact and fast compression riveter, has:
- a maximum rivet capacity of 7/32" dia (5.6 mm) for aluminium rivets (depending on the rivet joint thickness).
- a maximum rivet capacity of 5/32" dia (4 mm) for titanium rivets (depending on the rivet joint thickness).
- Start with the safety throttle lever - push/turn.
- Smooth controlled throttle movement for fast and slow approach.
- Alternative air inlet on request (example 1/4 BSP or 1/4 NPT).
Info
- To develop maximum power the riveter must squeeze the rivet near to the end of the riveting stroke. Therefore, the combined length of the two rivet sets must be correct.
- The operator can adjust exactly the position of the rivet by adjusting the snap holder (stroke 5 mm - 0.2"). This allows the operator to use the same rivet set for different thicknesses. Determine the correct length of rivet sets as follows.
-
- A - Component thickness
- B - Height of finished rivet head (flush)
- C - Rivet set height (fixed)
- D - Rivet set height (mobile)
- E - Closed height dimension of the jaws (adjust by moving the snap holder)
