Pressure Riveting Unit

RB 46-01 | RB 46-03

RB 46-03
Pedal cycle start-up and force adjustment on generator
STANDARD EQUIPMENT
RIVETING ASSEMBLY
REFERENCE
RB46-03
Hydropneumatic generator with 1.80 m (5.9ft) hose.
60300111
Riveting cylinder with connection block
60202010
Remote pedal control
60404005
60203016
Hydropneumatic generator with 3 m (9.84 ft) hose
60300211
Riveting cylinder with connection block
60202010
Remote pedal control
60404005
60203116
RB 46-01
Manual cycle start-up and force adjustment on cylinder
STANDARD EQUIPMENT
RIVETING ASSEMBLY
REFERENCE
RB46-01
Hydropneumatic generator with 1.80 m (5.9ft) hose.
60300106
Riveting cylinder with manual control on cylinder
60202005
60203006
Hydropneumatic generator with 3 m (9.84 ft) hose
60300206
Riveting cylinder with manual control on cylinder
60202005
60203106

Description and Advantages

  • The RB 46 pressure riveting assembly comprises a hydropneumatic generator, a hydraulic cylinder and a regulator for setting the force (max. 7 tons). It uses various standard and special yokes to form solid rivets made from various materials.
  • It is easy to use and adjust, making it suitable for all riveting operations on assembly rigs and for maintenance repairs.
  • The work cycle is performed automatically after initiation by the operator.
      - quick feed at low pressure until rivet contact
      - high pressure squeezing at preset forces
      - automatic return.
  • The principle of this riveting assembly is based on automatic control of the squeezing force; no additional adjustment is required to squeeze rivets of the same type, diameter and material on assemblies of varying thicknesses.
  • An adjusting nut can be used to reduce the return stroke to shorten the riveting time.
Pressure Riveting Unit diagram showing assembly details.

Info

  • When ordering, indicate riveting assembly code number only.
  • Options on request:
    • Special yokes
    • Assembly for riveting, dimpling and punching operations (fastened to fixed frames).

Technical Data

Max. Riveting Dia. (depending on the rivet joint thickness):
Light alloy: Ø 8 mm | 5/16"
Min. Force: 0.4 t
Monel Metal: Ø 6.35 mm | 1/4"
Max. Force: 7 t
Titanium:: Ø 5.6 mm | 7/32"
Max. Cylinder Stroke: 50 mm | 2.00"
Adjusting nut for return stroke